Grandstream UCM6510 User Manual - Manual (Page 126)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 125 of 313
time.
• Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Call Forward No Answer
Configure the Call Forward No Answer target number. If not configured,
the Call Forward No Answer feature is deactivated. The default setting is
deactivated.
CFN Time Condition
Select time condition for Call Forward No Answer. The available time
condition are “Office Time”, “Out of Office Time”, “Holiday”, “Out of
Holiday”, “Out of Office Time or Holiday” and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
• Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
• Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Call Forward Busy
Configure the Call Forward Busy target number. If not configured, the Call
Forward Busy feature is deactivated. The default setting is deactivated.
CFB Time Condition
Select time condition for Call Forward Busy. The available time condition
are “Office Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of
Office Time or Holiday” and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
• Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
• Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
CC Settings
Enable CC
If enabled, UCM6510 will automatically alert this extension when a called
party is available, given that a previous call to that party failed for some
reason.
Ring Simultaneously
Ring Simultaneously
Enable this option to have an external number ring simultaneously along
with the extension.
If a register trunk is used for outbound, the register number will be used to
be displayed for the external number as caller ID number.