Grandstream UCM6510 User Manual - Manual (Page 232)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 231 of 313
ONE-KEY DIAL
The UCM6510 supports One-Key Dial that allows users to call a certain destination by pressing one digit 0
to 9 on the keypad. This creates a system-wide speed dial access for all the extensions on the UCM6510.
To enable One-Key Dial, on the UCM6510 web GUI, go to page PBX->Call Features->One-Key Dial.
Figure 131: Configure One-Key Dial
User should first decide a digit used for One-Key Dial and check the option “Enable Destination” for the
digit. Then select a dial destination from “Default Destination”. The supported destinations include
extension, voicemail, conference room, voicemail group, IVR, ring group, call queue, page group, fax,
DISA, Dial by Name and external number.