Grandstream UCM6510 User Manual - Manual (Page 133)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 132 of 313
SEARCH AND EDIT EXTENSION
All the UCM6510 extensions are listed under web GUI->PBX->Basic/Call Routes->Extensions, with
status, Extension, CallerID Name, Technology (SIP, IAX and FXS), IP and Port. Each extension has a
checkbox for users to "Modify Selected Extensions" or "Delete Selected Extensions". Also, options
"Edit" , "Reboot" and "Delete" are available per extension. User can search an extension by
specifying the extension number to find an extension quickly.
Figure 75: Manage Extensions
• Status
Users can see the following icon for each extension to indicate the SIP status.
Green: Free
Blue: Ringing
Yellow: In Use
Grey: Unavailable
• Edit single extension
Click on to start editing the extension parameters.
• Reboot the user
Click on to send NOTIFY reboot event to the device which has an UCM6510 extension already
registered. To successfully reboot the user, "Zero Config" needs to be enabled on the UCM6510 web
GUI->PBX->Basic/Call Routes->Zero Config->Auto Provisioning Settings.
• Delete single extension
Click on to delete the extension. Or select the checkbox of the extension and then click on "Delete
Selected Extensions".