Grandstream UCM6510 User Manual - Manual (Page 33)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 32 of 313
USE THE WEB GUI
ACCESS WEB GUI
The UCM6510 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML
pages allow users to configure the device through a Web browser such as Microsoft IE (version 8+),
Mozilla Firefox, Google Chrome and etc.
Figure 4: UCM6510 web GUI Login Page
To access the web GUI:
1. Connect the computer to the same network as the UCM6510.
2. Ensure the device is properly powered up and shows its IP address on the LCD.
3. Open a web browser on the computer and enter the IP address in the address bar. The web login page
will display as shown above.
4. Enter the administrator’s login and password to access the web configuration menu. The default
administrator's username and password is "admin" and "admin". It is highly recommended to change
the default password after login for the first time.