Grandstream UCM6510 User Manual - Manual (Page 121)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 120 of 313
configured, the Call Forward Unconditional feature is deactivated. The
default setting is deactivated.
CFU Time Condition
Select time condition for Call Forward Unconditional. CFU takes effect
only during the selected time condition. The available time condition are
“Office Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of
Office Time or Holiday” and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
• Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
• Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Call Forward No Answer
Configure the Call Forward No Answer target number. If not configured,
the Call Forward No Answer feature is deactivated. The default setting is
deactivated.
CFN Time Condition
Select time condition for Call Forward No Answer. The available time
condition are “Office Time”, “Out of Office Time”, “Holiday”, “Out of
Holiday”, “Out of Office Time or Holiday” and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
• Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.
• Office Time and Holiday could be configured on page Settings->Time
Settings->Office Time/Holiday page.
Call Forward Busy
Configure the Call Forward Busy target number. If not configured, the Call
Forward Busy feature is deactivated. The default setting is deactivated.
CFB Time Condition
Select time condition for Call Forward Busy. The available time condition
are “Office Time”, “Out of Office Time”, “Holiday”, “Out of Holiday”, “Out of
Office Time or Holiday” and “Specific”.
Note:
• “Specific” has higher priority to “Office Times” if there is a conflict in
terms of time period.
• Specific time can be configured on the bottom of the extension
configuration dialog. Scroll down the add Time Condition for specific
time.