Grandstream UCM6510 User Manual - Manual (Page 212)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 211 of 313
PAGING AND INTERCOM GROUP
Paging and Intercom Group can be used to make an announcement over the speaker on a group of
phones. Targeted phones will not ring but answer immediately using speaker. The UCM6510 paging and
intercom can be used via feature code to a single extension or a paging/intercom group. This sections
describes the configuration of paging/intercom group under web GUI->PBX->Call
Features->Paging/Intercom.
CONFIGURE PAGING/INTERCOM GROUP
• Click on "Create New Paging/Intercom Group" to add paging/intercom group.
Figure 115: Paging/Intercom Group
Table 73: Paging/Intercom Group Configuration Parameters
Name Configure paging/intercom group name.
Extension Configure the paging/intercom group extension.
Type Select "2-way Intercom" or "1-way Page".
Custom Prompt
This option is setting a custom prompt used as announcement placed to
the person receiving a paging/internal call. The file can be uploaded from
the web GUI->Internal Options->Custom Prompt, or click the ‘Prompt’ to
add additional recorded.
Page/Intercom Group
Members
Select available users from the left side to the paging/intercom group
member list on the right.