Figure 125: configure extension for fax machine, Figure 126: configure inbound rule for fax – Grandstream UCM6510 User Manual User Manual

Page 226

Firmware Version 1.0.2.5

UCM6510 IP PBX User Manual

Page 225 of 313

Figure 125: Configure Extension For Fax Machine

7. Go to web GUI->PBX->Basic/Call Routes->Inbound Routes page.

8. Create an inbound route to use the Fax analog trunk. Select the created extension for Fax machine in

step 4 as the default destination.

Figure 126: Configure Inbound Rule for Fax

Now the Fax configuration is done. When there is an incoming Fax calling to the PSTN number for the

FXO port, it will send the Fax to the Fax machine.