Firmware version 1.0.0.25 – Grandstream UCM6510 User Manual User Manual
Page 19
Firmware Version 1.0.2.5
UCM6510 IP PBX User Manual
Page 18 of 313
• Added E&M Immediate and E&M Wink signaling for T1 [Error! Reference source not found.]
• Renamed the 'network backup' settings items to 'data sync' [DATA SYNC]
• Added “Download Search Result” in CDR [CDR]
• Added office time and holiday setting support [OFFICE TIME] [HOLIDAY]
• Added time condition for call forward [EXTENSIONS]
• Added support to monitor FXO trunk using SLA [SLA STATION]
• Added One-Key Dial function [ONE-KEY DIAL]
• Added Follow Me support [FOLLOW ME]
• Supported external number as the key pressing event of an IVR
• Improved APIs for Zero Config templates and settings [PROVISIONING]
• Supported GXP16XX, Surveillance and GS_wave models in Zero Config [PROVISIONING]
• Added advanced settings for devices discovered in Zero Config [DEVICE CONFIGURATION]
• Added ability to delete multiple recording files at one time [RECORDING FILES]
• Added call queue destination if no answer/timeout [Table 74: Call Queue Configuration Parameters]
• Added call queue Music on Hold customization [Table 74: Call Queue Configuration Parameters]
• Added restricted AMI access [ASTERISK MANAGER INTERFACE (RESTRICTED ACCESS)]
Warning: Please do not enable AMI on the UCM6510 if it is placed on a public or untrusted network
unless you have taken steps to protect the device from unauthorized access. It is crucial to understand
that AMI access can allow AMI user to originate calls and the data exchanged via AMI is often very
sensitive and private for your UCM6510 system. Please be cautious when enabling AMI access on the
UCM6510 and restrict the permission granted to the AMI user. By using AMI on UCM6510 you agree
you understand and acknowledge the risks associated with this.
• Added ability to choose the type(s) of files to be cleaned in cleaner [CLEANER]
• Added DTMF configuration per SIP trunk [Table 56: Create New SIP Trunk]
• Added ability to upload and play ring group announcement [Table 72: Ring Group Parameters]
• Added ability to upload and play paging call announcement [PAGING AND INTERCOM GROUP]
• Added Alert-info configuration for distinctive ringing on inbound route [Table 64: Inbound Rule
• Added ability to prepend digits/trunk name to inbound calls’ caller ID [Table 64: Inbound Rule
• Modified Static Routes Interface display when network method is changed [STATIC ROUTES]
FIRMWARE VERSION 1.0.0.25
• This is the initial version.