Sample configuration for fax-to-email, Figure 127: create fax extension, Figure 128: inbound route to fax extension – Grandstream UCM6510 User Manual User Manual

Page 227

Firmware Version 1.0.2.5

UCM6510 IP PBX User Manual

Page 226 of 313

SAMPLE CONFIGURATION FOR FAX-TO-EMAIL

The following instructions describe a sample configuration on how to use Fax-to-Email feature on the

UCM6510.

1. Connect PSTN line to the UCM6510 FXO port.

2. Go to UCM6510 web GUI->Internal Options->Fax/T.38 page. Create a new Fax extension.

Figure 127: Create Fax Extension

3. Go to UCM6510 web GUI->Basic/Call Routes->Analog Trunks page. Create a new analog trunk

with "FAX Detection" set to "No".

4. Go to UCM6510 web GUI->Basic/Call Routes->Inbound Routes page. Create a new inbound route

and set the default destination to the Fax extension.

Figure 128: Inbound Route to Fax Extension

5. Once successfully configured, the incoming Fax from external Fax machine to the PSTN line number

will be converted to PDF file and sent to the Email address [email protected] as

attachment.