Manage devices, Figure 62: create new device, Figure 63: manage devices – Grandstream UCM6510 User Manual User Manual

Page 100

Firmware Version 1.0.2.5

UCM6510 IP PBX User Manual

Page 99 of 313

1. Firstly select a model for the device to be created and enter its MAC address, IP address and firmware

version (optional) in the corresponding field.

2. Basic settings will show a list of settings based on the model selected in step 1. Users could assign

extensions to accounts, assign functions to Line Keys and Multiple-Purposed Keys if supported on the

selected model.

3. Click on “Create New Device” to save the configuration for this device.

Figure 62: Create New Device

MANAGE DEVICES

The device manually created or discovered from Auto Discover will be listed in the web UI->PBX->Zero

Config->Zero Config page. Users can see the devices with their MAC address, IP address, vendor,

model and etc.

Figure 63: Manage Devices

1. Click on

to access the web UI of the phone.

2. Click on

to edit the device configuration.