Grandstream UCM6510 User Manual - Manual (Page 102)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 101 of 313
All the selected global templates will take effect. If the same option exists on multiple selected
global templates, the value in the template with higher priority will override the one in the template
with lower priority. Click on to remove the global template from the selected list.
(3) Default Model Template
Default Model Template will be applied to the devices of this model. Default model template can be
configured in model template under web UI->PBX->Zero Config->Model Templates page.
Please see default model template option in [Table 30: Create New Model Template] .
(4) Model Templates
Select a model template to be used for the device and click on to add. Multiple global
templates can be selected and users can arrange the priority by adjusting orders via and
. All the selected model templates will take effect. If the same option exists on multiple selected
model templates, the value in the template with higher priority will override the one in the template
with lower priority. Click on to remove the model template from the selected list.
(5) Customize Device Settings
This is the highest level configuration in the “Advanced” settings of the device. Click on “Modify
Customize Device Settings” and following dialog will show.