beautypg.com

Table 57: sip register trunk, Configuration parameters – Grandstream UCM6510 User Manual User Manual

Page 165

background image

Firmware Version 1.0.2.5

UCM6510 IP PBX User Manual

Page 164 of 313

NAT

Turn on this setting when the PBX is using public IP and communicating

with devices behind NAT. If there is one-way audio issue, usually it is

related to NAT configuration or SIP/RTP port support on the firewall.

Disable This Trunk

If checked, the trunk will be disabled.

Note:

If a current SIP trunk is disabled, UCM6510 will send UNREGISTER

message (REGISTER message with expires=0) to the SIP provider.

TEL URI

If the trunk has an assigned PSTN telephone number, this field should be

set to "User=Phone". Then a "User=Phone" parameter will be attached to

the Request-Line and TO header in the SIP request to indicate the E.164

number. If set to "Enable", "Tel:" will be used instead of "SIP:" in the SIP

request. The default setting is disabled.

Need Registration

Select whether the trunk needs to register on the external server or not

when "Register SIP Trunk" type is selected. The default setting is No.

Username

Enter the username to register to the trunk from the provider when

"Register SIP Trunk" type is selected.

Password

Enter the password to register to the trunk from the provider when

"Register SIP Trunk" is selected.

Auth ID

Enter the Authentication ID for "Register SIP Trunk" type.

Auto Record

Enable automatic recording for the calls using this trunk (for SIP trunk

only). The default setting is disabled. The recording files can be accessed

under web GUI->CDR->Recording Files.

Table 57: SIP Register Trunk Configuration Parameters

Basic Settings

Provider Name

Configure a unique label to identify this trunk when listed in outbound

rules, inbound rules and etc.

Host Name

Configure the IP address or URL for the VoIP provider’s server of the

trunk.

Transport

Configure the SIP transport protocol to be used in this trunk. The default

setting is "All - UDP Primary".
• UDP Only
• TCP Only
• TLS Only
• All - UDP Primary: UDP is the primary transport protocol when all the

other SIP transport methods are available too.

• All - TCP Primary: TCP is the primary transport protocol when all the