Grandstream UCM6510 User Manual - Manual (Page 95)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 94 of 313
When creating global template, users can select the categories and the parameters under each categories
to be used in the template. The global policy and the selected global template will both take effect when
generating the config file. However, the selected global template has higher priority to the global policy
when it comes to the same setting option/field. If the same option/field has different value configured in the
global policy and the selected global template, the value for this option/field in the selected global template
will override the value in global policy.
• Click on "Create New Template" to add a global template. Users will see the following configurations.
Table 29: Create New Template
Template Name Create a name to identify this global template.
Description Provide a description for the global template. This is optional.
Active Check this option to enable the global template.
• Click on
to edit the global template.
The window for editing global template is shown in the following figure. In the “Options” field, after
entering the option name key word, the options containing the key word will be listed. Users could then
select the options to be modified and click on “Add Option” to add it into the global template.