beautypg.com

Firmware version 1.0.1.12 – Grandstream UCM6510 User Manual User Manual

Page 18

background image

Firmware Version 1.0.2.5

UCM6510 IP PBX User Manual

Page 17 of 313

• Added option to configure whether to skip pressing 1/2 to accept or reject calls from Follow Me [Table

76: Follow Me Settings]

• Added option to specify port range in Port Forwarding configuration [Table 11: UCM6510 Network

Settings->Port Forwarding]

• Added ability to go back to IVR menu from Dial By Name by pressing the star key [DIAL BY NAME

CONFIGURATION]

• Added support to upgrade SIP end device via SD card in Zero Config [Table 26: Global Policy

Parameters - Maintenance]

• Added ability to filter alert logs [ALERT LOG]
• Added ability to delete alert logs [ALERT LOG]
• Added NAT option for peer trunk [Table 63: Outbound Route Configuration Parameters]
• Improved Automatic Download CDR result format [CDR]
• Fixed Digital Trunk SS7 signaling mode inbound / outbound call problem
• Fixed Asterisk is crashed while using external MCB and CEI

FIRMWARE VERSION 1.0.1.12


• Added Active Calls feature to monitor call status and barge in active calls [ACTIVE CALLS AND

MONITOR]

• Added support to disable the trunk for VoIP trunk and analog trunk [Table 56: Create New SIP Trunk]

[Table 45: Analog Trunk Configuration Parameters]

• Added RBS support on T1 [Error! Reference source not found.]
• Added Frame Relay support on Data Trunk [DATA TRUNK]
• Added 'Assign CIC to D-channel' option on SS7 settings page [Table 49: Digital Hardware

Configuration Parameters: E1 - SS7]

• Added 'First CIC' option in SS7 configuration [Table 49: Digital Hardware Configuration Parameters:

E1 - SS7]

• Added 'D-Chan' selection for PRI and SS7 in editing digital ports [Table 48: Digital Hardware

Configuration Parameters: E1 - PRI_NET/PRI_CPE] [Table 49: Digital Hardware Configuration

Parameters: E1 - SS7]

• Added support for Ring simultaneously feature for extensions [Table 31: SIP Extension Configuration

Parameters]

• Added support for Music On Hold selection per extension [Table 31: SIP Extension Configuration

Parameters]

• Added support to disable this extension per extension [Table 31: SIP Extension Configuration

Parameters]

• Added ability to set personal password for making outbound calls per extension [Table 31: SIP

Extension Configuration Parameters]

• Added 'TEL URI' configuration for SIP extension/VoIP trunk [Table 31: SIP Extension Configuration

Parameters] [Table 56: Create New SIP Trunk]