Grandstream UCM6510 User Manual - Manual (Page 87)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 86 of 313
Figure 56: Auto Discover
The following figure shows a list of discovered phones. The MAC address, IP Address, Extension (if
assigned), Version, Vendor, Model, Connection Status, Create Config, Options (Edit/Delete/Update) are
displayed in the list.
Figure 57: Discovered Devices
GLOBAL CONFIGURATION
GLOBAL POLICY
Global configuration will apply to all the connected Grandstream SIP end point devices in the same LAN
with the UCM6510 no matter what the Grandstream device model it is. It is divided into two levels:
• Web UI->PBX->Zero Config->Global Policy
• Web UI->PBX->Zero Config->Global Templates.
• Global Templates configuration has higher priority to Global Policy configuration.
Global Policy can be accessed in web GUI->PBX->Zero Config->Global Policy page. On the top of the
configuration table, users can select category in the "Options" dropdown list to quickly navigate to the
category. The categories are:
• Localization: configure display language, data and time.
• Phone Settings: configure dial plan, call features, NAT, call progress tones and etc.