Grandstream UCM6510 User Manual - Manual (Page 202)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 201 of 313
VOICEMAIL
CONFIGURE VOICEMAIL
If the voicemail is enabled for UCM6510 extensions, the configurations of the voicemail can be globally set
up and managed under web GUI->PBX->Call Features->Voicemail.
Table 68: Voicemail Settings
Max Greeting
Configure the maximum number of seconds for the voicemail greeting. The
default setting is 60 seconds.
Dial '0' For Operator
If enabled, the caller can press 0 to exit the voicemail application and
connect to the configured operator's extension. The operator extension
can be configured under web GUI->PBX->Internal Options->General.
Max Messages Per Folder
Configure the maximum number of messages per folder in users'
voicemail. The valid range 10 to 1000. The default setting is 50.
Max Message Time
Select the maximum duration of the voicemail message. The message will
not be recorded if the duration exceeds the max message time. The default
setting is 15 minutes. The available options are:
• 1 minute
• 2 minutes
• 5 minutes
• 15 minutes
• 30 minutes
• Unlimited
Min Effective Message Time
Configure the minimum effective duration (in seconds) of a voicemail
message. Messages will be automatically deleted if the duration is shorter
than the Min Effective Message Time. The default setting is 3 seconds.
The available options are:
• No minimum
• 1 second
• 2 seconds
• 3 seconds
• 4 seconds
• 5 seconds
Note:
Silence and noise duration are not counted in message time.
Announce Message Caller-ID If enabled, the caller ID of the user who has left the message will be