beautypg.com

Figure 24: ucm6510 port forwarding configuration – Grandstream UCM6510 User Manual User Manual

Page 55

background image

Firmware Version 1.0.2.5

UCM6510 IP PBX User Manual

Page 54 of 313

• On the UCM6510 web UI->Settings->Network Settings->Port Forwarding, configure a port

forwarding entry as the figure shows below.

WAN Port: This is the port opened up on the WAN side for access purpose.

LAN IP: This is the GXP2160 IP address, under the LAN interface network of the UCM6510.

Protocol Type: We select TCP here for web UI access using HTTP.

Figure 24: UCM6510 Port Forwarding Configuration

This will allow users to access the GXP2160 web UI from public side, by typing in address “1.1.1.1:8088”.

Figure 25: GXP2160 Web Access Using UCM6510 Port Forwarding

See also other documents in the category Grandstream Communication: