Grandstream UCM6510 User Manual - Manual (Page 251)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 250 of 313
• Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
Audio Mix Record
• Default code: *3.
• Enter the code followed by # or SEND to start recording the
audio call and the UCM6510 will mix the streams natively on the
fly as the call is in progress.
• Options
Disable
Allow Caller: Enable the feature code on caller side only.
Allow Callee: Enable the feature code on callee side only.
Allow Both: Enable the feature code on both caller and callee.
DND/Call Forward
Do Not Disturb (DND) Activate • Default code: *77.
Do Not Disturb (DND) Deactivate • Default code: *78.
Call Forward Busy Activate
• Default Code: *90.
• Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Busy Deactivate • Default Code: *91.
Call Forward No Answer Activate
• Default Code: *92.
• Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward No Answer
Deactivate
• Default Code: *93.
Call Forward Unconditional
Activate
• Default Code: *72.
• Enter the code and follow the voice prompt. Or enter the code
followed by the extension to forward the call.
Call Forward Unconditional
Deactivate
• Default Code: *73.