Remote extension in ring group, Figure 112: sync ldap server option, Remote extension in ring – Grandstream UCM6510 User Manual User Manual

Page 210: Group

Firmware Version 1.0.2.5

UCM6510 IP PBX User Manual

Page 209 of 313

REMOTE EXTENSION IN RING GROUP

Remote extensions from the peer trunk of a remote UCM6510 can be included in the ring group with local

extension. An example of Ring Group with peer extensions is presented in the following:

1. Creating SIP Peer Trunk between both UCM6510_A and UCM6510_B. SIP Trunk can be found under

web UI-> PBX-> Basic/Call Routes-> VoIP Trunks. Also, please configure their Inbound/Outbound

routes accordingly.

2. Click edit button in the menu

, and check if Sync LDAP Enable is selected, this option

will allow UCM6510_A update remote LDAP server automatically from peer UCM6510_B. In addition,

Sync LDAP Password must match for UCM6510_A and UCM6510_B in order to sync LDAP contact

automatically. Port number can be anything between 0~65535, and use the outbound rule created in

step 1 for the LDAP Outbound Rule option.

Figure 112: Sync LDAP Server option