Grandstream UCM6510 User Manual - Manual (Page 308)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 307 of 313
TROUBLESHOOTING
On the UCM6510, users could capture traces, ping remote host and traceroute remote host for
troubleshooting purpose under web GUI->Maintenance->Troubleshooting.
ETHERNET CAPTURE
The captured trace can be downloaded for analysis. Also the instructions or result will be displayed in the
web GUI output result.
Figure 182: Ethernet Capture
The output result is in .pcap format. Therefore, users could specify the capture filter as used in general
network traffic capture tool (host, src, dst, net, protocol, port, port range) before starting capturing the
trace.
IP PING
Enter the target host in host name or IP address. Then press "Start" button. The output result will
dynamically display in the window below.