Grandstream UCM6510 User Manual - Manual (Page 34)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 33 of 313
--------------------------------------------------------------------------------------------------------------------------------------------
Note:
By default, the UCM6510 has "Redirect From Port 80" enabled. Therefore, if users type in the UCM6510 IP
address in the web browser, the web page will be automatically redirected to the page using HTTPS and
port 8089.
For example, if the LCD shows 192.168.40.167, please enter 192.168.40.167 in your web browser and the
web page will be redirected to:
https://192.168.40.167:8089
The option "Redirect From Port 80" can be configured under the UCM6510 web GUI->Settings->HTTP
Server.
--------------------------------------------------------------------------------------------------------------------------------------------
WEB GUI CONFIGURATIONS
There are four main sections in the web GUI for users to view the PBX status, configure and manage the
PBX.
•
Status: Displays PBX status, System Status, System Events and CDR.
•
PBX: To configure extensions, trunks, call routes, zero config for auto provisioning, call features,
internal options, IAX settings, SIP settings, as well as ports configuration for digital trunks.
•
Settings: To configure network settings, firewall settings, change password, LDAP Server, HTTP
Server, Email Settings, Time Settings and NTP server.
•
Maintenance: To perform firmware upgrade, backup configurations, cleaner setup, reset/reboot,
syslog setup and troubleshooting.
WEB GUI LANGUAGES
Currently the UCM6510 web GUI supports the following languages:
English
Simplified Chinese
Traditional Chinese
Spanish