Grandstream UCM6510 User Manual - Manual (Page 281)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 280 of 313
Figure 152: System Status->Resource Usage
SYSTEM EVENTS
The UCM6510 can monitor important system events, log the alerts and send Email notifications to the
system administrator.
ALERT EVENTS LIST
The system alert events list can be found under web GUI->Status->System Events->Alert Events List.
Click on to configure the parameters for each event.
1. Disk Usage
Figure 153: System Events->Alert Events Lists: Disk Usage
• Detect Cycle: The UCM6510 will perform the internal disk usage detection based on this cycle.
Users can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the
cycle.
• Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
system will send the alert.