Grandstream UCM6510 User Manual - Manual (Page 203)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 202 of 313
announced at the beginning of the voicemail message. The default setting
is "No".
Announce Message Duration
If enabled, the message duration will be announced at the beginning of the
voicemail message. The default setting is "No".
Play Envelope
If enabled, a brief introduction (received time, received from, and etc) of
each message will be played when accessed from the voicemail
application. The default setting is "Yes".
Play from Last
If enabled, UCM6510 will play from the voice message left most recently; if
disabled, UCM6510 will play from the earliest left voice message
Allow User Review
If enabled, users can review the message following the IVR before sending
the message out. The default setting is "No".
ACCESS VOICEMAIL
If the voicemail is enabled for UCM6510 extensions, the users can dial the voicemail access feature code
(by default *98 or *97) to access the extension’s voicemail. The users will be prompt to enter the voicemail
password and then can enter digits from the phone keypad to navigate in the IVR menu for different
options.
Table 69: Voicemail IVR Menu
Main Menu Sub Menu 1 Sub Menu 2
1 - New
messages
3 - Advanced options
1 - Send a reply
2 - Call the person who sent this message
3 - Hear the message envelop
4 - Leave a message
* - Return to the main menu
5 - Repeat the current message
7 - Delete this message
8 - Forward the message to another user
9 – Save
* - Help
# - Exit
2 - Change
folders
0 - New messages
1 - Old messages
2 - Work messages
3 - Family messages
4 - Friend messages