Ddns settings, Figure 26: register domain name on noip.com, Figure 27: ucm6510 ddns setting – Grandstream UCM6510 User Manual User Manual

Page 56

Firmware Version 1.0.2.5

UCM6510 IP PBX User Manual

Page 55 of 313

DDNS SETTINGS

DDNS setting allows user to access UCM6510 via domain name instead of IP address.

The UCM6510 supports DDNS service from the following DDNS provider:

• dydns.org
• noip.com
• freedns.afraid.org
• zoneedit.com
• oray.net

Here is an example of using noip.com for DDNS.

1. Register domain in DDNS service provider. Please note the UCM6510 needs to have public IP access.

Figure 26: Register Domain Name on noip.com

2. On web UI->Settings->Network Settings->DDNS Settings, enable DDNS service and configure

username, password and host name.

Figure 27: UCM6510 DDNS Setting