Grandstream UCM6510 User Manual - Manual (Page 195)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 194 of 313
entry within the timeout (in seconds). If no DTMF entry is detected within
the timeout, a timeout prompt will be played. The default setting is 10
seconds.
Response Timeout Prompt Select the prompt message to be played when timeout occurs.
Invalid Prompt
Select the prompt message to be played when an invalid extension is
pressed.
Response Timeout Repeat
Loops
Configure the number of times to repeat the prompt if no DTMF input is
detected. When the loop ends, it will go to the timeout destination if
configured, or hang up. The default setting is 3.
Invalid Repeat Loops
Configure the number of times to repeat the prompt if the DTMF input is
invalid. When the loop ends, it will go to the invalid destination if
configured, or hang up. The default setting is 3.
Language
Select the voice prompt language to be used for this IVR. The default
setting is "Default" which is the selected voice prompt language under
web GUI->PBX->Internal Options->Language. The dropdown list
shows all the current available voice prompt languages on the UCM6510.
To add more languages in the list, please download voice prompt
package by selecting "Check Prompt List" under web
GUI->PBX->Internal Options->Language.
Key Pressing Events
Key Press Event:
Press 0
Press 1
Press 2
Press 3
Press 4
Press 5
Press 6
Press 7
Press 8
Press 9
Press *
Timeout
Invalid
Select the event for each key pressing for 0-9, *, Timeout and Invalid. The
event options are:
7. Extension
8. Voicemail
9. Conference Rooms
10. Voicemail Group
11. IVR
12. Ring Group
13. Queues
14. Page Group
15. Fax
16. Custom Prompt
17. Hangup
18. DISA
19. Dial By Name
20. External Number
21. Callback