Grandstream UCM6510 User Manual - Manual (Page 282)

Firmware Version 1.0.2.5 UCM6510 IP PBX User Manual Page 281 of 313
2. Modify Admin Password
Figure 154: System Events->Alert Events Lists: Modify Admin Password
• Detect Cycle: The UCM6510 will initiate the admin password check based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
3. Memory Usage
Figure 155: System Events->Alert Events Lists: Memory Usage
• Detect Cycle: The UCM6510 will perform the memory usage detection based on this cycle. Users
can enter the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
• Alert Threshold: If the detected value exceeds the threshold (in percentage), the UCM6510
system will send the alert.
4. System Reboot
Figure 156: System Events->Alert Events Lists: System Reboot
• Detect Cycle: The UCM6510 will check the system reboot based on this cycle. Users can enter
the number and then select second(s)/minute(s)/hour(s)/day(s) to configure the cycle.
5. System Update