Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 99)

Chapter 5
ATCA-7350 Installation and Use (6806800G59G) 99
System Management
5.1 Overview
This chapter describes the feature set of the IPMI v.2.0 compliant Intelligent Platform
Management Interface Controller firmware. Furthermore Sensors implemented are described.
For more details about the IPMC and its command set, please see the ATCA-7350 IPMI Users
manual.
5.2 Sensor Information
The ATCA-7350 provides different sensors to monitor various board voltages, temperatures,
board states and events. The sensors available on the blade/RTM are shown in the table below:
Table 5-1 Sensors Overview
Sensor Name Sensor Type
CPU Inlet Temp Temperature
FBD Inlet Temp Temperature
HD Env Temp Temperature
CPU0 Core Rem Temperature
CPU1 Core Rem Temperature
+3.3V_BAT Voltage
+3.3VCC Voltage
+5VSB Voltage
+12VCC Voltage
+5VCC Voltage
+3.3VSB Voltage
FRU Hot Swap Hot Swap State
IPMB Link State IPMB Link State
-48V Power1 -48V Power1 State
-48V Power2 -48V Power2 State
CPU0 Status CPU0 Status
CPU1 Status CPU1 Status