Figure 5-5, Configuration for rhel – Artesyn ATCA-7350 Installation and Use (September 2014) User Manual

Page 110

System Management

ATCA-7350 Installation and Use (6806800G59G)

110

4. Type : wq! to save the changes.

5. Ensure that at least one agetty process is running on the serial port.

To do this, modify the file /etc/inittab. vi /etc/inittab

Change the system console by adding/modifying the "co" service.
For RHEL:
co:2345:respawn:/sbin/agetty ttyS0 9600 vt100-nav

6. Reboot the blade.

Change HyperTerminal to 9600, 8, n, 1, n to make sure the BIOS, bootloader, and
OS come up at 9600 baud.

Figure 5-5

Configuration for RHEL