5 deleting raid 1, Figure 7-21, Array view window – Artesyn ATCA-7350 Installation and Use (September 2014) User Manual

Page 151: Figure 7-22, Window for saving the settings

Text mode
Original mode

RAID 1 Operations

ATCA-7350 Installation and Use (6806800G59G)

151

7. Select RAID Properties. Press . The array view window is displayed as shown

Figure 7-21

. RAID 1 is activated successfully and synchronized automatically. The

RAID 1 synchronization progress is displayed in Status.

8. Enter Return to the window as shown in

Figure 7-22

. Select Exit the

Configuration Utility and Reboot. Press . The system is restarted.

7.5

Deleting RAID 1

If the two SAS hard disks fail to synchronize because a hard disk is moved, you need to delete
all RAID 1 properties and then set and synchronize RAID 1 again.

Figure 7-21 Array View Window

Figure 7-22 Window for Saving the Settings