Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 32)

Hardware Preparation and Installation
ATCA-7350 Installation and Use (6806800G59G) 32
The blade provides two independent power inputs according to the AdvancedTCA
specification.
2.4 Precautions
Electric Shock
There is current in the power cords and communication cables. Touching the connectors of
the power cords and communication cables may cause electric shock.
Do not touch the connectors of power cords and communication cables.
Electrostatic Discharge
Do not touch the circuit board with bare hands.
The static electricity of the human body may damage the electrostatic sensitive devices
(ESSDs) on the circuit board.
Make sure that you wear an electrostatic discharge (ESD)-preventive wrist strap or antistatic
glove to prevent the static electricity from hurting you or damaging the device.
Keep your personal objects such as your clothes away from the ATCA-7350 suite. To prevent
the static electricity from damaging the device, it is recommended to wear antistatic
clothes.
Pin Damage
If the blade is not fully aligned with the interface in the backplane, too much force may twist
the pins on the blade or backplane.
Do not exert too much force when you insert the blade.