Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 47)

Hardware Preparation and Installation
ATCA-7350 Installation and Use (6806800G59G) 47
3. Exert even force to push the hard disk smoothly in the hard disk holder. Align the screw
holes at the sides of the hard disk with those at the sides of the holder, as shown in Figure
2-6 .
4. Use the screwdriver to fasten the four screws clockwise to fix the hard disk, as shown in
Figure 2-6 .
5. Exert even force to push the hard disk in the fixing bracket on the ATCA-7350, as shown in
Figure 2-6 .
6. Insert the ATCA-7350 with the hard disk installed in the shelf if not already installed in the
system.
For details, see
Installing the ATCA-7350 in a Powered Shelf on page 51 .
You can install the other hard disk in the same way.