Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 88)

Functional Description
ATCA-7350 Installation and Use (6806800G59G) 88
4.6.4 Gigabit Ethernet (ATCA-7350 with RTM-ATCA-7350)
The ATCA-7350 with RTM-ATCA-7350 provide the following 1/10 Gigabit Ethernet (GE)
interfaces:
 Two Base interface GE (10/100/1000 BASE-T) on ATCA-7350.
 The two GE Base interfaces support PXE function. PXE function can be enabled or disabled
through the BIOS SETUP UTILITY (Disabled by default), more details see section 6.3.8 PXE
Function Configuration Submenu, The MAC address needed during the PXE network
booting process are shown in this BIOS menu.
 Two Fabric interface 10GE on ATCA-7350 (requires RTM-ATCA-7350 to be installed).
 One Update Channel interface GE (1000Base-SX/LX) on ATCA-7350.
 Two customized 4 Lane PCI-E buses in RTM-ATCA-7350, providing 2, 4 external GE ports
with 1, 2 external GE daughter cards configured.
Please refer to RTM-ATCA-7350 Installation and Use manual.
4.6.5 Gigabit Ethernet (ATCA-7350 with RTM-ATCA-7150)
The ATCA-7350 with RTM-ATCA-7150 provide the following Gigabit Ethernet (GE) interfaces:
 Two Base interface GE (10/100/1000 BASE-T) on ATCA-7350.
 The two GE Base interfaces support PXE function. PXE function can be enabled or disabled
through the BIOS SETUP UTILITY (Disabled by default), more details see section 6.3.8 PXE
Function Configuration Submenu, The MAC address needed during the PXE network
booting process are shown in this BIOS menu.
 Two Fabric interface 1 GE on ATCA-7350.
 One Update Channel interface GE (1000Base-SX/LX) on ATCA-7350.
 Four customized 4 Lane PCI-E buses in RTM-ATCA-7150, providing 2, 4, 6, 8 external GE
ports with 1, 2, 3, 4 external GE daughter card configured.
Please refer to RTM-ATCA-7150 Installation and Use manual.