Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 44)

Hardware Preparation and Installation
ATCA-7350 Installation and Use (6806800G59G) 44
7. Insert the ATCA-7350 with the DIMM installed in the shelf.
For details, see Installing the ATCA-7350 in a Powered Shelf on page 51 .
After installation, insert the ATCA-7350 in the shelf and power on the ATCA-7350. Check
whether the OS can be loaded properly. If it can be, in the OS, check whether the displayed
memory capacity is consistent with the actual one.
2.6.4.2 Replacing the DIMM
To replace the DIMM, proceed as follows:
1. Wear the ESD-preventive wrist strap.
For details, see Wearing the ESD-Preventive Wrist Strap on page 34 .
Figure 2-4 Installing the DIMM
You can install the DIMMs in all DIMM sockets in the same way.