Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 38)

Hardware Preparation and Installation
ATCA-7350 Installation and Use (6806800G59G) 38
2.6 Installing Blade Accessories
2.6.1 Precautions
When you install or replace components, pay attention to the following points:
 Wear the ESD-preventive wrist strap to prevent the static electricity from damaging the
device.
 Keep the area where the components reside clean and keep the components away from
the heat generating devices, such as radiator.
 Ensure that your sleeves are tightened or rolled up above the elbow. For safety purpose, it
is not recommended to wear jewelry, watch, glasses with metal frame, or clothes with
metal buttons.
 Do not exert too much force, or insert or remove the components forcibly. Avoid damage
to the components or plug-ins.
Electric Shock
There is current in the power cords and communication cables. Touching the connectors of
the power cords and communication cables may cause electric shock.
Do not touch the connectors of power cords and communication cables.