Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 84)

Functional Description
ATCA-7350 Installation and Use (6806800G59G) 84
4.3.2 Processor Locations
The ATCA-7350 can be configured with two central processing units (CPUs) or a single CPU.
When only one CPU is configured, the CPU must be installed in CPU socket 0. The positions of
CPU socket 0 and CPU socket 1 are shown in
Figure 4-2 .
4.4 Chipset
4.4.1 Memory Controller Hub
The Memory Controller Hub connects the processors to the main memory and the payload I/O
of the ATCA-7350. It features:
 Quad-pumped 1066 MHz FSB
 Point to point DIB processor system bus interface
 Peak address generation rate of 533 Million Addresses/second
Figure 4-2 Processor Locations