Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 66)

Controls, LEDs and Connectors
ATCA-7350 Installation and Use (6806800G59G) 66
The 10/100/1000 BASE-T data signals used in the Base Interface have the following
conventions:
BI(m)_D[x]p where:
 x = differential pair (A-D)
 m = Logical Slot number (1-2)
 p = polarity (+, -)
The data signals used in the Fabric Interface have the following conventions:
F(m)Tx/Rx[n]p where:
 Tx/Rx = transmit/receive
 m = Channel designator (1-2)
 n = Port number (0-3)
 p = polarity (+, -)
Table 3-4 J23/P23 Connector Pin Assignments for ATCA-7350
Pin
Interface
Designation
A B C D E F G H
1 Fabric
Channel 2 F(2)Tx2+ F(2)Tx2- F(2)Rx2+ F(2)Rx2- F(2)Tx3+ F(2)Tx3- F(2)Rx3+ F(2)Rx3-
2 F(2)Tx0+ F(2)Tx0- F(2)Rx0+ F(2)Rx0- F(2)Tx1+ F(2)Tx1- F(2)Rx1+ F(2)Rx1-
3 Fabric
Channel 1 F(1)Tx2+ F(1)Tx2- F(1)Rx2+ F(1)Rx2- F(1)Tx3+ F(1)Tx3- F(1)Rx3+ F(1)Rx3-
4 F(1)Tx0+ F(1)Tx0- F(1)Rx0+ F(1)Rx0- F(1)Tx1+ F(1)Tx1- F(1)Rx1+ F(1)Rx1-
5 Base
Channel 1 BI(1)_DA
+
(Tx1+) BI(1)_DA
-
(Tx1-) BI(1)_DB
+
(Rx1+) BI(1)_DB
-
(Rx1-) BI(1)_DC
+ BI(1)_DC- BI(1)_DD
+
BI(1)_DD
-
6 Base
Channel 2 BI(2)_DA
+
(Tx2+) BI(2)_DA
-
(Tx2-) BI(12_DB
+
(Rx2+) BI(2)_DB
-
(Rx2-) BI(2)_DC
+ BI(2)_DC- BI(2)_DD
+
BI(2)_DD
-