Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 115)

System Management
ATCA-7350 Installation and Use (6806800G59G) 115
Ending an SOL Session
To end an SOL session:
1. Type: <~>.
This is done at the login prompt.
2. After typing <~>. the SOL session will deactivate on the ATCA-7350. To make sure
the ATCA-7350 SOL session is deactivated, type the following command:
# ipmitool -I lanplus -L operator -H -
U solusername - P soluserpassword sol deactivate
SOL is stopped completely and the serial console port is now redirected to the front
panel of the ATCA-7350.
After pressing <~> just once, this symbol will not appear on the console screen.