Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 30)

Hardware Preparation and Installation
ATCA-7350 Installation and Use (6806800G59G) 30
2.3 Environmental and Power Requirements
The following environmental and power requirements are applicable to the blade.
2.3.1 Environmental Requirements
Table 2-2 Environmental Requirements
Requirement Operating Non-Operating
Temperature +5ºC (41ºF) to +40ºC (105ºF) (normal operation)
according to NEBS Standard GR-63-CORE
-5ºC to +55ºC (exceptional operation) according
to NEBS Standard GR-63-CORE
1
-40ºC (-40ºF) to +70ºC
(158ºF).
2
Temp. Change +/- 0.25ºC/min according to NEBS Standard GR-
63-CORE +/- 0.25ºC/min
Rel. Humidity 5% to 85% non-condensing according to
Artesyn-internal environmental requirements 5% to 95% non-condensing
according to Artesyn-internal
environmental requirements
Altitude <=3000 m
Maximum
weight 4.0 kg
Length x width x
height 322.3 mm × 280 mm × 29 mm
Vibration
(tested in target
platform) 1g from 5 to 100 Hz and back to 5 Hz at a rate of
0.25 octave/minute
3
5-20 Hz at 0.01 g 2 /Hz
20-200 Hz at -3.0 dB/octave
Random 5-20 Hz at 1 m
2
/Sec
3
Random 20-200 Hz at -3
m/Sec
2
Shock Half-sine, 11 m/Sec, 30mSec/sec 2 Blade level packaging
Half-sine, 6 mSec at 180
m/Sec
2