Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 130)

BIOS
ATCA-7350 Installation and Use (6806800G59G) 130
NOTE: Bold text indicates default setting.
6.9.2.8 PXE Function Configuration Submenu
To access this submenu, select Advanced on the menu bar, and then PXE Function
Configuration.
The menu represented in the following table is used to configure PXE Function options.
NOTE: Bold text indicates default setting.
6.9.2.9 MCFG Table Support item
To access this submenu, select Advanced on the menu bar, and then MCFG Table Support Item.
The item represented in the following table is used to configure MCFG Table support options.
Table 6-13 PXE Function Configuration Submenu
Feaature Options Description
Base1 PXE Function Disabled
Enabled Disable/Enable Base1 PXE Function.
MAC Address Show the MAC Address of Base1.
Base2 PXE Function Disabled
Enabled Disable/Enable Base2 PXE Function.
MAC Address Show the MAC Address of Base2.
Fabric1 MAC Address Show the MAC Address of Fabric1.
Fabric2 MAC Address Show the MAC Address of Fabric2.
Update MAC Address Show the MAC Address of Update.
Table 6-14 MCFG Table Support Item
Feature Options Description
MCFG Table Support Disabled
Enabled Disable this item for Linux installation. If Linux kernel
version is 2.6.16 or later, Choose Enable. Default is
Disabled.