Altera Arria V Avalon-ST - Manual (Page 30)

Error Reporting
Table 3-4: Error Reporting
Parameter Value Default Value Description
Advanced
error
reporting
(AER)
On/Off Off When On, enables the Advanced Error Reporting (AER)
capability.
ECRC
checking
On/Off Off When On, enables ECRC checking. Sets the read-only
value of the ECRC check capable bit in the
Advanced
Error Capabilities and Control Register
. This
parameter requires you to enable the AER capability.
ECRC
generation
On/Off Off When On, enables ECRC generation capability. Sets the
read-only value of the ECRC generation capable bit in
the
Advanced Error Capabilities and Control
Register
. This parameter requires you to enable the
AER capability.
Not applicable for Avalon-MM DMA.
ECRC
forwarding
On/Off Off When On, enables ECRC forwarding to the Application
Layer. On the Avalon-ST RX path, the incoming TLP
contains the ECRC dword (3) and the
TD
bit is set if an
ECRC exists. On the transmit the TLP from the Applica‐
tion Layer must contain the ECRC dword and have the
TD
bit set.
Not applicable for Avalon-MM DMA.
Link Capabilities
Table 3-5: Link Capabilities
Parameter Value Description
Link port
number
0x01 Sets the read-only value of the port number field in the
Link
Capabilities Register
.
(3) Throughout this user guide, the terms word, dword and qword have the same meaning that they have in
the PCI Express Base Specification. A word is 16 bits, a dword is 32 bits, and a qword is 64 bits.
2014.12.15
Error Reporting 3-7
Parameter Settings Altera Corporation
Send Feedback