Link type - any axis status bits – Delta MMC120 User Manual

Page 137

137

1. Calculate the Link Type:

This involves converting the following bit fields into a hexadecimal byte. It is

highly recommended that the Link Type and Link Value popup dialog be used

instead of doing this manually. Use the following diagram to calculate the byte in

binary and then convert to hexadecimal or decimal and enter in the Link Type

field.

Axis 0 or 1

0 is

≤

, 1 is

≥

1 0

0 is Target Speed,

1 is Actual Speed

2. Enter the Limit (threshold) speed in the Link Value field.

Link Type - Any Axis Status Bits

Link Type: See below

Link Value: Bit pattern that must be set or cleared

Range: Any bits

These link types wait for at least one of a user-selectable group of Status Bits to be set or

cleared on the axis selected by the link type.

Using with the

Link Type and Link Value

Popup Dialog

1. Under Link Type Category, select Selected Axis (Enhanced).
2. Under Axis, select the axis you desire to monitor.
3. Under Link Type, select Status Bits.
4. Under Link Condition, select the appropriate option for whether you wish to wait

for one or more bits to be ON or OFF.

5. Under Link Condition, check the boxes next to the Status bits that you wish to

monitor with this link type.

Using without the