SilentKnight 5700 - Manual (Page 142)

System Operation 151295
8-10
Supervisory The system
detects a
supervisory
condition.
The system
detects a
supervisory
condition with a
CO detector
The dialer seizes control of the phone line
and calls the central station.
The on-board annunciator sounds a loud,
pulsing beep in the sequence one second
on, one second off.
SUPERVISORY LED flashes.
The LCD displays a screen similar to this
one.
Press down arrow to view the supervisory
condition. A screen similar to this one
displays.
Press SILENCE and enter an access code
(or activate the key) to silence the
annunciator.
Once the supervisory condition has been
corrected, the system will restore itself
automatically.
After sitting idle, events will display in a
screen similar to this:
Table 8-1: Operation Modes of FACP
Operation
Mode
Occurs
When
System Behavior In This Mode You Can