Juniper Systems Allegro DOS Manual - Manual (Page 72)

Page 4-6 Windows CE
screen as you move across it. To avoid this problem, the Allegro is
equipped with a special Touchscreen Disable/Enable key described below.
+
The unique Touchscreen Disable/Enable key allows you to temporarily
disable the touchscreen and wipe it off without inadvertently making
selections on the screen. Press the BLUE shift key and the key to
disable the screen. The contents of the display are still shown, but
nothing happens if you press on the touchscreen.
Ideally, you should use a clean cotton cloth to gently wipe off the screen.
Do not use anything abrasive that could scratch the screen, including
tissues and paper towels. (In the field, the tail of your shirt will do, as
long as it is made of a non-abrasive fabric!) Once the screen has been
cleaned, use the same key sequence to enable the touchscreen. Refer to
Section 2, Hardware, Display for more details.
▲ ▲ ▲ ▲ ▲ Windows CE Programs
Desktop PC Programs
The CD-ROM’s include the following programs for your PC:
❏ Windows ActiveSync

(on the Microsoft ActiveSync CD-ROM)
❏ PTab 
File Converter (on the Allegro Utilities CD-ROM)
❏ Software Development Kits for Visual Basic 
and Visual C++ â (on the
Allegro Utilities CD-ROM)
Software Suite
A set of Windows CE programs are factory installed on the Allegro. The
following programs are included:
❏ PTab
™ Spreadsheet Program
❏ Explorer ™ File Manager
❏ Inbox ™ Email Utility
❏ Pocket Internet Explorer ™
❏ Pocket Word ™
❏ Calculator
❏ Terminal Program
Copies of the Windows CE programs are included on the Allegro
Utilities CD-ROM. Each program is described in detail in this section of
the manual.