Juniper Systems Allegro DOS Manual - Manual (Page 117)

Windows CE Page 4-51
Remote Allegro File Maintenance
You can perform many convenient Allegro file maintenance operations
remotely from the desktop PC using ActiveSync. Move, copy, and delete
files from the Allegro window simply by dragging and dropping them
or by using the cut and paste functions. You cannot start programs
remotely. If you double-click on an executable file, the properties of that
file are shown.
Disconnecting
When you are finished transferring files between the Allegro and the
desktop PC, disconnect the Allegro by double tapping on the Connected
symbol located in the status box on the Taskbar.
! ! ! ! !
The following type of screen is shown:
Tap on the Disconnect button. If you are using a serial port, you can now
disconnect the communication cable.
❖ Note: In addition to the steps outlined previously, the following actions
cause the Allegro to disconnect from the desktop PC:
- Turning the Allegro or the desktop PC off
- Disconnecting the communication cable
- Misaligning the IrDA ports while using infrared communication