beautypg.com

Juniper Systems Allegro DOS Manual User Manual

Page 37

background image

Hardware Features Page 2-19

4) Slide the latches downward until they cannot slide any further to

securely latch the battery door closed.

Do not turn on the Allegro yet.

5) Plug the AC wall charger that came with the Allegro into the wall

socket.

The small green light on the wall adapter turns on when it is plugged
into the wall.

6) Remove the rubber protector from the Allegro’s external power input

jack.

7) Plug the power connector end of the wall charger into the Allegro.

8) Charge the battery pack at room temperate until the LED charge light

on the Allegro turns off. This can take three to five hours the first time
you charge the battery.