Comtrol Hub DeviceMaster - Manual (Page 89)

DeviceMaster Installation and Configuration Guide: 2000594 Rev. A DeviceMaster Security - 89
Changing Keys and Certificates
5. Make the appropriate selection for your situation:
• Click Continue, if you addition configuration and then make sure that you
reboot the DeviceMaster later so that the changes take affect.
• Click Reboot so that changes take affect as soon as the DeviceMaster
returns online.
Changing Keys and
Certificates Use the following steps to update security keys and certificates in the
DeviceMaster.
1. If necessary, enter the IP address of the DeviceMaster in the Address field of
your web browser and press the Enter key.
2. Click the Security tab.
3. Click Set for the appropriate key or certificate option in the Keys and
Certificate Management area to configure security keys and certificates.
Refer to the help system or Key and Certificate Management subsection on
Page 89 for detailed information.
4. Click Browse to locate the key or certificate file, highlight the file, and click
Open.
5. Click Upload when you return to the Key and Certificate Management area.
The key or certificate notation changes from factory or none to User when the
DeviceMaster is secure.