Comtrol Hub DeviceMaster - Manual (Page 138)

138 - Hardware Specifications DeviceMaster Installation and Configuration Guide: 2000594 Rev. A
Hardware Specifications
External Power Supply Specifications
This subsection discusses information that you may need if you wish to use your
own external power supplies.
• 1-Port 5VDC Power Supply (below)
• 1-Port 5-30VDC Power Supply on Page 138
• 2-Port (Serial Terminals) Power Supply on Page 139
• 2-Port (DB9) Power Supply on Page 139
• 4-Port Power Supply on Page 140
• 8-Port Power Supply on Page 140
• 16-Port Power Supplies on Page 140
1-Port 5VDC Power
Supply This subsection only provides information for the
DeviceMaster 1-port 5VDC model.
The following table provides the DeviceMaster power specifications, if you intend
on purchasing your own external power supply.
1-Port 5-30VDC
Power Supply This table provides specifications for the
optional power supply from Comtrol.
This table provides the specifications, if you
intend on using your own power supply.
Comtrol Power Supply: 1-Port 5VDC
Input line frequency
Input line voltage
Output voltage
Output current
47 - 63 Hz
90 - 260VAC
5VDC
2.0A @ 5VDC
External Power Supply: 1-Port 5VDC
Output voltage†
Current†
Power
5VDC
420 mA (Min) @ 5VDC
2.1 W
† Any power supply that meets current consumption, voltage,
power, and connector pinouts requirements can be used.
+VDC
Power Connector
Coaxial 5.5±0.1 x 2.1 mm
Comtrol Power Supply: 1-Port 5-30VDC
Input line frequency
Input line voltage
Output voltage
Output current
43-63 Hz
90-260 VAC
24VDC
500 mA @ 24VDC
External Power Supply: 1-Port 5-30VDC
Output voltage†
Current†
Power
5-30VDC
100 mA (Min) @ 24VDC
2.5 W
† Any power supply that meets current consumption, voltage,
power, and connector pinouts requirements can be used.
Earth Gnd
Return
Positive
5-30VDC
+
-
Wire gauge:
AWG 12-22
Screw Terminal Connector