Comtrol Hub DeviceMaster - Manual (Page 111)

DeviceMaster Installation and Configuration Guide: 2000594 Rev. A Managing the DeviceMaster - 111
Managing the DeviceMaster
3. Highlight the DeviceMaster for which you want to save the port-level
configuration.
4. Highlight the port for which you want to save port configuration.
5. Click Save Configuration.
6. Repeat this process for each port for which you want to save the configuration
settings.
Loading Driver
Configuration Files You must have previously saved a driver configuration file before you can load a
configuration file.
The driver configuration file uploads in portions:
• Device-level configuration parameters.
• Port configuration parameters. You must upload each port's configuration
parameters separately.
Loading Device
Configuration Use the following procedure to load the configuration file for device-level
information for your DeviceMaster.
1. If necessary, open the Comtrol Drivers Management Console using one of these
methods:
• Windows Control Panel; go to your Control Panel and click on the
Comtrol Drivers Management Console.
• Shortcut; located under Start> Program Files> Comtrol> DeviceMaster>
Comtrol Drivers Management Console.
2. Depending on your operating system, you may need to click Yes to the Do you
want to allow the following program to make changes to this computer? User
Account Control message.