Comtrol Hub DeviceMaster - Manual (Page 119)

DeviceMaster Installation and Configuration Guide: 2000594 Rev. A Managing the DeviceMaster - 119
Managing the DeviceMaster
5. If a higher version of SocketServer is available and you want to update the
DeviceMaster with the latest software:
a. Update SocketServer using Uploading SocketServer with PortVision DX
on Page 45.
b. Download the latest driver from ftp://ftp.comtrol.com/dev_mstr/rts/drivers/
win7 .
c. Update to the latest driver using the DeviceMaster Device Driver (NS-
Link) User Guide, which can be downloaded using Page 12 or viewed on
the Comtrol CD shipped with the DeviceMaster.
Restoring Factory Defaults (2-Port, Only)
Use the following procedures to restore a DeviceMaster 2-port model to the factory
defaults. To return to default port settings, see
Restoring Serial Port Settings on
Page 119.
Note: For other models, see Returning the DeviceMaster to Factory Defaults on
Page 173.
If Technical Support advises you to restore the DeviceMaster factory defaults,
depress the Reset/Restore switch for greater than 5 seconds.
Restoring the DeviceMaster 2-port models resets the following to their factory
defaults:
• Network settings
• Password
• Telnet enable
• Start up time-out
• SSL enable
• Telnet time-out
Restoring Serial Port Settings
Use the web page and/or the NS-Link device driver for Windows to restore the
serial port settings to their default values.
The NS-Link serial port settings are independent of the socket serial port settings
on the web page. If you are using COM ports and also have configured the port for
socket services, you must restore the default port settings in the driver and web
page.