Using a web browser to set security features, Changing security configuration – Comtrol Hub DeviceMaster User Manual
Page 88
88 - DeviceMaster Security
DeviceMaster Installation and Configuration Guide: 2000594 Rev. A
Using a Web Browser to Set Security Features
Using a Web Browser to Set Security Features
The follow procedures are discussed below:
•
Changing Security Configuration
•
Changing Keys and Certificates
Changing Security
Configuration
Use the following steps to change security settings in the DeviceMaster.
1.
Enter the IP address of the DeviceMaster in the Address field of your web
browser and press the Enter key.
2.
Click the Security tab.
3.
Click the appropriate check boxes in the Security Configuration area to enable
or disable security accordingly.
Configure/Enable Security Features Overview
Page 83 for detailed information.
4.
After making changes to the Security Configuration area, click Save.
The Software displays as NS-Link, if you have installed
and configured a device driver.